top of page

Many people in charge are interested in drone surveying but do not know where to start to avoid failure. Even when companies consider introducing it to save labor on site or improve progress monitoring, they often end up buying equipment first and then stopping because operations do not take hold. Especially in construction, surveying, and civil engineering sites, it is not simply a matter of “shoot and immediately use”; it is important to proceed including clarifying objectives, site conditions, precision considerations, role-sharing with ground surveying, and building an internal organizational structure.


What matters when introducing drone surveying is not aiming for perfection from the start. Rather than rolling it out to all sites at once, it is better to start small at sites where it is suitable and solidify the flow from capture to deliverable use step by step—this leads to quicker internal adoption. This article organizes the process from pre-introduction considerations to site consolidation into seven steps in a way that is easy for beginners to understand. It is not merely an equipment introduction; it focuses on practical viewpoints that make decision-making easier and explains an introduction procedure that avoids detours.


Table of Contents

• Why drone surveying is hard to embed if the procedure is wrong

• Step 1: First narrow the introduction objectives to one or two

• Step 2: Choose sites that are suitable and narrow down the first target site

• Step 3: Decide the boundary between in-house and outsourcing assuming a small start

• Step 4: Decide the internal organization first to prevent dispersed responsibility and reliance on specific individuals

• Step 5: Consider equipment as a minimal configuration and don’t rush purchasing

• Step 6: Organize the approach to accuracy confirmation and decide role-sharing with ground surveying

• Step 7: Standardize operations so the workflow can be continuously used on site

• Ways of thinking to avoid typical detours beginners make

• The relationship with ground surveying to keep in mind when introducing drone surveying

• Conclusion


Why drone surveying is hard to embed if the procedure is wrong

A major attraction of drone surveying is that it can capture a wide area in a short time compared with conventional surveying and site management. Its use cases are increasing—checking current conditions at development sites, measuring earthwork volumes, visualizing progress, and assessing situations in disasters. However, companies that fail to introduce it successfully have something in common: they treat purchase of equipment as the entry point to introduction.


For example, if one assumes that aerial capture replaces all surveying work, the gap between expectations and reality becomes large. In practice, suitability varies with site conditions, and for some precision requirements ground verification or supplementation is indispensable. Also, if you do not consider point cloud processing and orthoimage production after capture, internal sharing of deliverables, and how to explain results to clients or stakeholders, efforts may end as one-off trials.


Conversely, if you work backward from objectives and proceed step by step, drone surveying can become a very usable system. The important thing is to judge the success of introduction not by “whether flights could be made” but by “whether it contributed to site decision-making and work improvement.” With this view, it becomes easier to see what to keep in-house, what to outsource, and where to combine with ground surveying.


Step 1: First narrow the introduction objectives to one or two

The first step is to clarify what you want to improve with drone surveying. If this remains vague at the start, capture itself can become the goal and it will be hard to use on site. In practice, it is important not to be greedy about introduction objectives.


Common objectives include speeding up understanding of current topography, periodically recording as-built conditions and progress, reducing labor for wide-area site checks, and efficiently acquiring base data for earthwork volume calculations. Although these may seem similar, required accuracy, capture frequency, desired deliverables, and operational setup differ. For example, whether the goal is monthly progress recording or reproducibility high enough for construction planning changes the steps you need to prepare.


Beginners often take a detour by loading multiple expectations—“surveying,” “photo records,” “earthwork calculations,” “3D modeling,” “internal PR,” etc.—onto the introduction at once. This makes the deliverables each stakeholder looks for different and easily causes the evaluation criteria to fluctuate. Initially, it is safer to choose one theme whose value on site is easy to demonstrate. For example, start with monthly fixed-point photography and terrain visualization, or with monitoring earthwork volume changes at a development site—choosing themes with easily comparable effects helps gain internal understanding.


When deciding introduction objectives, it is effective to concretely describe site issues in writing. For example: “It takes half a day to check current conditions,” “photos for progress sharing are scattered and hard to compare,” “preparing materials for client explanations takes time.” These make post-introduction evaluation easier. The key here is not to make the use of drones itself the objective. Positioning drones as a means to solve problems makes it easier to judge the necessary organization and costs.


Step 2: Choose sites that are suitable and narrow down the first target site

Next, carefully select the first site to try. Drone surveying does not deliver the same effect at every site. If you choose an unsuitable site early on, a method that could be effective may be judged “unusable,” so caution is required.


Suitable initial sites tend to be those with relatively good visibility, a certain area, and where aerial understanding has high value. For instance, development sites, embankments, temporary stockpiles of soil, certain sections of road improvement, cut-and-fill slopes, and large material storage yards tend to allow you to feel the benefits of introduction more readily. Aerial capture makes it easier to grasp areas as surfaces and to organize the overall picture that is hard to see from the ground.


On the other hand, avoid for initial introduction places with heavy influence from trees or structures, very narrow sites, locations with complex surrounding conditions, or sites with strict airspace constraints or safety management. Also, sites whose primary purpose is checking fine dimensions or local positioning are difficult to handle solely with drones, and may not be the best targets for creating initial success stories. Of course, experience expands the range of applicable sites, but tackling highly challenging conditions from the start makes scheduling and deliverable quality unstable.


When deciding target sites, consider not only accuracy requirements but also whether performance can be compared internally. For example, if you already know the time required by conventional methods, the manpower needed, and how deliverables are used at a site, it is easier to explain the effects after introduction. Whether site staff are cooperative and can spare time for trials is also important. Even if a site is technically suitable, if staff are too busy to participate in verification, it will be hard to improve operational procedures.


There is no need to find a perfect representative site for early introduction. Rather, select sites where results are easy to see and stakeholders are likely to be convinced. If you can complete the whole flow from capture to deliverable use at the first site, expanding to the next sites becomes much easier.


Step 3: Decide the boundary between in-house and outsourcing assuming a small start

When introducing drone surveying, you need to decide early what will be handled in-house and what will be outsourced. If this remains vague, you can end up with equipment but no processing, or able to capture but unable to use deliverables—leading to a half-finished situation.


Starting small does not simply mean keeping the budget down. It means beginning within a range that can be stably operated in-house. For example, in the initial stage it is realistic to keep flight planning and on-site operations in-house while outsourcing processing and creation of advanced deliverables. This allows site personnel to learn the drone surveying workflow while validating it with high-quality deliverables.


Conversely, attempting to internalize everything from capture, processing, deliverable organization, to internal rollout from the outset often concentrates workload on a few people. Particularly in stages where point cloud processing and orthoimage handling are unfamiliar, these can take longer than expected. What is needed in the early stages is not to own everything but to understand the whole workflow and grasp where the burdens and decision points are.


When using outsourcing, it is also important not to hand everything off without oversight. If you cannot clearly communicate shooting conditions, required deliverables, accuracy thinking, delivery data formats, and internal usage, the delivered products may not be usable on site. Outsourcing is convenient, but if you leave objective clarification to outside parties, it becomes hard to retain internal decision criteria.


A recommended approach is that for the first few projects, organize site requirements in-house and outsource parts of the process as needed while learning. This helps you see which parts it would be most effective to internalize later. Whether to internalize capture only, to do simple deliverable organization in-house, or to include advanced analysis should be decided based on experience to reduce failure.


Step 4: Decide the internal organization first to prevent dispersed responsibility and reliance on specific individuals

In companies where introduction stalls, work tends to concentrate on one person who knows drones well. If that person is busy, operations stop, and if they are transferred or leave, the whole system can disappear. If you want to use drone surveying continuously, building an internal system that runs within the company is more important than the technology itself.


At a minimum, assign roles for site responsibility, people responsible for flight and capture, and people who receive and utilize deliverables. The same person can hold multiple roles, but if roles are ambiguous, confirmations can be missed. For example, clarifying who confirms objectives and required accuracy before capture, who decides on deliverable acceptance, and who converts results into internal shared materials will increase operational reproducibility.


An often overlooked practical issue is the recognition gap between field departments and management. Field staff may expect efficiency gains, while management may worry about safety management and procedural burden. Conversely, management may be positive about introduction, but field staff may be wary, fearing “it will just add workload.” To bridge this gap, share not only expected benefits but also necessary preparations and constraints at the introduction stage.


Also, training personnel is not a one-time event. Even if they learn flight operations, without understanding under what conditions which deliverables are obtained, what error factors exist, and when ground supplementation is needed, it will be difficult to use results for site decisions. In the early stages, give as much emphasis to understanding how to read and use deliverables as to capture skills.


To prevent reliance on specific individuals, it is effective to document site-by-site decisions. For example, briefly recording why drone surveying was used at a site, where it was suitable and where ground confirmation was required, what went well, and what took time makes it easier for the next person to reproduce the workflow. Companies that successfully embed introduction accumulate operational knowledge more than technical information.


Step 5: Consider equipment as a minimal configuration and don’t rush purchasing

When you hear about introducing drone surveying, you tend to think of equipment selection first, but in practice the order should be reversed. It is easier to avoid wasted investment if you decide objectives, target sites, organization, and the in-house scope before thinking about equipment. A common mistake in the early stages is selecting an expensive configuration anticipating functions you might need in the future. What is needed initially is not a universal setup that does everything, but the minimal configuration that can stably handle the first use case.


For example, if the main objectives are current condition checks and periodic recording, what matters more than high functionality is that the system can be used stably on site, shooting conditions are easy to standardize, and the flow to deliverable organization is clear. Conversely, choosing a setup that requires complex initial settings or advanced processing raises operational burden and tends to limit the number of people who can operate it. Whether equipment performance or repeatable in-house usability is more important should guide the choice.


As important as purchasing is preparing the environment for surrounding tasks. Saving capture data, sharing deliverables, naming rules, linking with site photos, and organizing data into formats easy for stakeholders to view—these post-capture operations are indispensable for practical use. If these are not in place, captured data will not be utilized and the introduction benefits will be hard to see.


In the early stage, it is also effective to create opportunities for trials before purchasing. By outsourcing or conducting test introductions and seeing what deliverables and operation frequency you actually need, you can narrow down the configuration and reduce the chance of failure. Holding large expensive equipment while the number of sites is limited is less effective than first solidifying the introduction procedure.


When selecting equipment, consider not only accuracy but also who will handle it, how often it will be used, and which departments will use the deliverables. Successful introduction is determined not by catalog performance but by whether it is continuously used on site.


Step 6: Organize the approach to accuracy confirmation and decide role-sharing with ground surveying

One of the most important practical decisions when introducing drone surveying is organizing how much accuracy to require and where. If this is vague, results may look convenient on site but later people will not know “how much they can trust this output.” Conversely, if you organize accuracy confirmation, the strengths and limits of drone surveying become clear and it is easier to decide role-sharing with ground surveying.


First, understand that while drone surveying is good at efficiently capturing wide areas as surfaces, it does not replace ground surveying in all situations. Aerial acquisition is powerful for grasping overall trends, visualizing terrain changes, earthwork management, and before-and-after comparisons. However, local dimensional checks, information under obstacles, details around structures, positioning, and control point management are often situations where ground verification is important.


Therefore, at introduction decide “what to cover with drone surveying and what to secure with ground surveying.” For example, it is realistic to assign overall current topography and periodic comparisons to drones, and baseline position confirmations or supplemental measurements at necessary spots to ground surveying. Having this idea prevents excessive expectations of drones and makes it easier to establish a practical accuracy management flow on site.


Beginners often stumble by treating visually attractive deliverables as high-precision survey results. Orthoimages and point clouds are visually easy to understand, so accuracy verification tends to be postponed, but in practice alignment with control is indispensable. Predefine which coordinate system to use, where to align control, and how to verify reproducibility on site to avoid problems in later stages.


Also, accuracy confirmation is not a one-time task. Results vary with shooting conditions, weather, target object condition, and site environment. Therefore, do not assume the same quality will appear every time, even at the same site. To improve reproducibility, standardize shooting conditions and fix the points that must be checked on the ground.


At this stage, consider combining high-precision ground positioning. A workflow where drone surveying captures the whole site and ground surveying reliably captures necessary points balances efficiency and certainty. The idea of capturing surfaces from the air and tightening key points on the ground is a basic approach that stabilizes post-introduction operations.


Step 7: Standardize operations so the workflow can be continuously used on site

The final step is to turn trials into an operation that can be continuously used on site. At this point, whether something can technically be done is less important than whether the same quality can be produced each time. Even if you achieve certain results in the early stage, if procedures vary by person, site evaluations will not be stable.


Standardization does not require creating complicated manuals but aligning decision points. For example, establish basic rules such as when to use drone surveying, which sites are excluded, what to check before capture, who checks deliverables, and where to include ground verification. This helps maintain a certain quality even when personnel change.


Also, to embed usage on site you must consider how deliverables will be used. No matter how good the data, if it is not tied to meeting materials, progress sharing, construction decisions, or client explanations, it will be hard to see its value on site. Therefore, design not only the deliverables themselves but also who will use them in which situations. In practice, introduction is more effective when site supervisors and managers can immediately see how to use the deliverables, rather than only technical staff understanding them.


Conducting post-introduction reviews is also indispensable for operational consolidation. Organize what steps took longer than expected in the first operation, which deliverables were hard to use, additional ground checks that became necessary, and points where internal sharing stalled, then reflect these in the next iteration. Just repeating such improvements a few times can greatly change the maturity of the introduction.


Companies where introduction sticks do not aim for large-scale rollout from the start. First, create a reproducible flow at a few sites, then expand the target sites and personnel. Drone surveying proves most valuable when it is standardized as part of site operations rather than treated as a one-off new technology.


Ways of thinking to avoid typical detours beginners make

We have reviewed the seven steps, but there are several common detours in real introductions. Knowing these in advance significantly reduces the chance of failure.


First, starting with equipment selection. Equipment is important, but without clear objectives and target sites you cannot decide what configuration you need. Gathering high-functionality kits before defining what to improve leads to unused features.


Second, trying to complete everything with drone surveying alone. Aerial wide-area capture is highly effective, but site decisions sometimes require more than that. Local checks and assurance of control are stabilized by ground supplementation. Assuming role-sharing with ground surveying from the start makes operations more realistic.


Third, making the in-house scope too wide from the beginning. Taking on capture, processing, deliverable organization, and internal explanation at once increases the burden on staff. Initially, treat this as a phase of figuring out which steps should be kept in-house and use external resources while accumulating knowledge.


Fourth, not measuring effects. Saying “it was somehow convenient” will not convey the benefits internally. Measure comparable items such as previous required time, number of site checks, effort for document preparation, and ease of progress sharing to guide future investment decisions.


Fifth, leaving operations to an individual’s effort. Even if introduction seems to progress, it won’t stick if it only runs while that person is present. Share role allocation, procedure documents, decision criteria, and usage of deliverables to make the workflow organizationally sustainable.


The relationship with ground surveying to keep in mind when introducing drone surveying

To extract the true value of drone surveying, it is important to view conventional ground surveying not as a competitor but as a method with a different role. Aerial acquisition is strong in wide-area current condition checks, change comparisons, and surface information organization. Ground surveying is strong at reliably fixing required positions and points, local checks, and providing precision assurance directly tied to construction.


Combining the two wisely tends to improve overall site efficiency. For example, use drone surveying to grasp the whole picture before construction or for periodic checks, and use ground surveying to perform high-precision confirmation at locations important for design or construction management. This leverages breadth and speed while providing certainty where needed.


A practical approach that is easy to use is to avoid leaning too far to either side from the start. Capture broadly with drones and tighten with ground surveying. With this premise, it becomes easier to manage accuracy after introduction, explain things on site, and decide how to use deliverables. Especially on sites involving multiple personnel, having both aerial overall views and ground control checks reduces misunderstandings.


Conclusion

The recommended procedure for introducing drone surveying is to solidify objectives first rather than starting with equipment purchase. Clarify what you want to improve, select suitable sites, decide the boundary between in-house and outsourcing assuming a small start, organize internal roles, build operations with a minimal equipment configuration, organize accuracy confirmation and role-sharing with ground surveying, and finally standardize operations for site adoption—this flow reduces the likelihood of failure.


The more you rush introduction, the more you tend to focus on equipment and features, but the real difference comes from whether you can create a system that continues to be used on site. Drone surveying is very effective for efficiently capturing wide areas and visualizing sites. However, rather than trying to complete everything from the air, adopting the mindset of securing accuracy on the ground where necessary makes it more practical in the field.


A workflow of aerial overall capture and ground high-precision position checks for important points is an easily adoptable combination for future practice. When considering such an operation, it can be useful to take a quick look at systems like LRTK as an option for easy-to-use high-precision positioning that pairs well with smartphones. Viewing drone surveying not in isolation but connected with ground positioning to balance site-wide accuracy and efficiency is a shortcut to successful introduction.


Next Steps:
Explore LRTK Products & Workflows

LRTK helps professionals capture absolute coordinates, create georeferenced point clouds, and streamline surveying and construction workflows. Explore the products below, or contact us for a demo, pricing, or implementation support.

LRTK supercharges field accuracy and efficiency

​

The LRTK series delivers high-precision GNSS positioning for construction, civil engineering, and surveying, enabling significant reductions in work time and major gains in productivity. It makes it easy to handle everything from design surveys and point-cloud scanning to AR, 3D construction, as-built management, and infrastructure inspection.

bottom of page