top of page

What is location information management for indoor inspections? Practical approaches to improve recording accuracy

By LRTK Team (Lefixea Inc.)

All-in-One Surveying Device: LRTK Phone
text explanation of LRTK Phone

Table of Contents

• Why managing location information is important in indoor inspections

• Challenges of recording accurate locations indoors

• Specific methods to improve the accuracy of recorded location information

• Benefits of improving the accuracy of location information management

• What is simplified surveying with LRTK? High-precision location recording achievable with a smartphone

• FAQ


For inspection work conducted indoors, it is important to accurately record and share "what happened where." For example, have you ever reviewed inspection reports for a building or factory equipment later and wondered, "Where in the building did this fault occur?" Even if detailed inspections, photos, and notes are left on site, if they are not linked to accurate location information, discrepancies in understanding among stakeholders may arise later. Indoor inspection location information management is precisely the effort to address these issues and to give inspection results positional accuracy. In this article, we will review the importance and challenges of managing location information for indoor inspections and introduce concrete approaches to improve recording accuracy. Finally, we will touch on simple surveying using LRTK as a practical example leveraging the latest technologies, seeking hints for more accurate and efficient inspection methods.


Why Location Information Management Is Important in Indoor Inspections

In indoor inspection work, accurately recording "which locations were inspected" is indispensable for safety management and efficiency. Inspection reports include photos of defect locations and notes, but by themselves they tend to leave "where in the facility it is" ambiguous. For example, even if a periodic inspection report for factory equipment includes a photo of a machine malfunction, the reader cannot identify the exact location—whether it is on the north or south side of the building, or which floor and which unit—unless the position is specified. If the recorded location is vague, the effort required to find the relevant spot during later repairs or re-inspections increases, and there is even a risk of confusing it with another location.


On the other hand, if location information is clearly recorded, inspection results can be understood by the entire team within a shared spatial context. Photos are a means of conveying "what happened," but with location information you can objectively indicate "where it happened" as data. For example, if you can specify a concrete location such as "a leak from a pipe joint in the northwest corner of the boiler room on the 3rd floor," stakeholders can accurately picture the situation while cross-referencing drawings and the site. This reduces the likelihood of misunderstandings throughout the process from inspection to repair and maintenance, and makes information sharing and response smoother.


Also, if you manage location information appropriately, it can help with tracking changes over time. When re-inspecting the same equipment or structures, being able to check exactly the same spot as before allows you to accurately compare the progression of deterioration. Location-based history management is also powerful for long-term maintenance planning and for analyzing trouble trends. In this way, location information management in indoor inspections is an important element that forms the foundation for safe and efficient equipment management and reliable information transfer.


The Difficulty of Accurately Recording Positions Indoors

Even when its importance is understood, accurately recording positions indoors is not easy. The biggest challenge is that GPS (satellite positioning), which is taken for granted outdoors, hardly works indoors. Under a building’s roof or ceiling, signals from satellites have difficulty reaching, and the location information from smartphones and GPS cameras contains large errors. Even if some signal can be received, reflections from walls and ceilings (the so-called multipath) degrade accuracy, and errors can reach tens of meters. For that reason, it is not realistic to rely on standard GPS functionality to measure precise indoor positions.


If there is no alternative to GPS, indoors you have no choice but to record locations by human perception and manual work. On many sites, people have so far added textual descriptions to each inspection photo such as "near the entrance of Room XX" or "around the center of the north wall", or marked up paper drawings by hand. However, with these methods expressions vary depending on the person in charge, and omissions or memory errors occur. As long as one relies on human descriptions, the information tends to be subjective and inaccurate, and it is often difficult for someone else reading it to reproduce exactly the same location. Also, on busy inspection sites there is not enough time to record precise locations, and in many cases it ends up remaining as a rough note like "near equipment A". For these reasons, in indoor inspections it is common to have reports where the positional accuracy of location information is insufficient.


Furthermore, even if a smartphone or a camera automatically records location using its built‑in GPS function, its accuracy remains on the order of a few meters (a few ft). In large factories or complex buildings, an error of a few meters (a few ft) can cause critical confusion. For example, if there is a 5 m (16.4 ft) error on a floor, equipment in an adjacent room could be mistaken for the intended one. In a situation where "location information has been attached but may be slightly off from the actual place," people still have to check and correct it later, so the amount of work is not reduced. In this way, ensuring the accuracy of location records indoors is a difficult challenge both technically and operationally.


Specific methods for improving the accuracy of recorded location information

So, what approaches can improve the accuracy of recorded location information in indoor inspections? Here are some practical methods that can help.


• Cross-checking with drawings and maps: This is a method of plotting inspection points on floor plans or digital maps of the facility to be inspected. During inspections you record which locations were checked by marking them directly on the drawings or by placing pins on electronic drawings on a tablet. This makes spatial relationships clear at a glance and conveys locations more reliably than text-only notes. The key points are to prepare the latest drawings in advance and to use a common map representation that anyone can understand.

• Using identification tags and QR codes: This is a method of assigning unique IDs to the main inspection points and equipment inside a building and affixing QR codes or RFID tags. If those are scanned during an inspection, predefined location information such as "ID○○ = ○○ machine room Pump 1" is automatically recorded. With this method, once tags are installed anyone can reliably identify the same location. Especially in factories or buildings with a large number of pieces of equipment, management combined with a tag list improves recording accuracy and work efficiency.

• Dedicated apps and photo-alignment tools: Inspection support apps for smart devices sometimes include a function that allows you to select and record the location on a map at the same time as taking a photo. For example, by displaying a building floor map on a smartphone or tablet screen and tapping the location where the photo was taken to record it, you can link location coordinates and place names to the photos you took. AR (augmented reality) technology is being used in advanced apps that let you record locations while overlaying indoor geographic information on the camera view. By using these digital tools, you can intuitively add accurate location information on the spot, reducing omitted records and recording errors.

• Introduction of indoor positioning systems: This is a way to improve accuracy further by introducing specialized systems that measure the positions of people and objects inside buildings. Concrete examples include systems that estimate device locations from BLE beacons (Bluetooth transmitters) or from Wi‑Fi signal strength, and systems that use ultra-wideband (UWB) radio to track tags to within several tens of cm (approximately 4-12 in). Once installed, these can automatically collect position data, but you should note that they require initial costs and the effort of equipment installation and maintenance. For small buildings or sites with low inspection frequency, you need to consider cost-effectiveness carefully when deciding whether to implement them.

• Use of high-precision positioning equipment: Precision positioning devices that used to be handled only by surveying specialists have become easier to use in recent years. For example, there is a method of measuring distances between reference points inside a building using a laser distance meter or a total station (optical surveying instrument) and calculating detailed coordinates. Although it requires expertise and lacks immediacy, it can pinpoint positions to the millimeter (1 mm = 0.04 in), so it is still useful when installing critical equipment or changing factory layouts. Also, by using new high-precision positioning tools based on smartphone + GNSS described later, it is becoming possible to obtain centimeter-level position information (cm level accuracy (half-inch accuracy)) even in routine inspection tasks.


As described above, measures to improve accuracy range widely, from simple methods using paper drawings to leveraging the latest technologies. Depending on the scale and operations of the site, it is realistic to adopt them in stages, starting with methods that can be introduced without difficulty. What is important is that, for any method, the team shares the awareness of "not neglecting positioning" and implements it reliably.


Benefits of Improving the Accuracy of Location Information Management

Improving the accuracy of location information recorded during indoor inspections delivers many on-site benefits that justify the effort.


• Prevention of mistakes and oversights: If inspection points can be accurately identified, human errors such as "an issue was noted in the record but is not found on site" or "the location was mistaken and the wrong equipment was repaired" can be prevented. As a result, this leads to a reduction in safety risks and quality problems.

• Improved work efficiency: When referring to past inspection data, if high-accuracy location information is attached, the person in charge can immediately find the relevant spot. Since it becomes easy to locate "the same place as last time" during the next inspection, no unnecessary search time occurs on site. Tracing the records makes it easier to follow the history of each piece of equipment, enabling efficient planning of inspection schedules and identification of priority areas.

• Smoother information sharing and handovers: Precise location data becomes an objective common language, so handovers from veterans to newcomers and information sharing across multiple departments are smoother. For example, if it is recorded as "a pipe leak at a point 1.5 m (4.9 ft) above the center of the north wall of the power distribution room on basement level 2", even someone seeing the site for the first time can pinpoint the exact location. It reduces the need for explanations and increases the persuasiveness of reports.

• Use as a data asset: Inspection data tied to location information does not remain merely a record in reports but becomes a valuable data asset. By analyzing accumulated location-specific degradation trends, it is possible to identify zones with frequent failures and correlations with environmental factors. Also, if inspection results are reflected in the digital twin of a building or facility (a virtual model in electronic form), you can assess equipment conditions remotely and use the information for preventive maintenance, thereby raising the level of management.


In this way, improving the accuracy of location information management is returned to on-site operations in the form of "reduced rework", "improved efficiency", and "accumulation of knowledge". It may feel like a hassle at first, but as accurate data accumulates, those benefits will snowball. Reliable records also form an indispensable foundation for promoting on-site DX (digital transformation).


What is LRTK-based simplified surveying? High-precision position recording achievable with a smartphone

Recently, a cutting-edge technology attracting attention in this field is "LRTK (エルアールティーケー)". LRTK is a groundbreaking solution that combines smartphones with high-precision RTK positioning technology, and is a tool that makes it easy to achieve accurate location recording during indoor inspections that were previously difficult.


RTK (Real Time Kinematic) is originally a GPS correction technique used in surveying that dramatically improves satellite positioning accuracy by correcting position errors in real time between a base station and a rover. Traditionally, RTK positioning that achieves centimeter-class accuracy (cm level accuracy (half-inch accuracy)) required stationary, expensive receivers and specialized setup. However, LRTK condenses this RTK positioning into a form anyone can use through a small GNSS receiver module that attaches to a smartphone and a dedicated app. Usage is simple: hold the smartphone outdoors where the sky is visible, start positioning, and then, with the current coordinates obtained at centimeter-level accuracy (cm level accuracy (half-inch accuracy)), simply take photos or enter notes. The measured latitude and longitude data (location tags) are automatically recorded in the captured photo files, allowing you to keep records with high-precision location information that could not be obtained with ordinary GPS-equipped cameras.


The advantage of LRTK is that it functions as a surveying instrument that can be operated entirely with a single smartphone per person. Even without a surveyor, inspectors themselves can, through intuitive操作, capture precise geotagged photos and inspection data. There is no need to measure distances separately with a tape or to annotate photos afterward as was traditionally required. Furthermore, the LRTK app automatically uploads collected data to the cloud and includes a feature to plot capture locations on a map for management. It also enables real-time sharing of field data with colleagues and navigation back to past inspection points with a pinpoint revisit capability, dramatically improving the accuracy and efficiency of maintenance and management.


For example, photos of equipment deterioration taken with LRTK during inspections are tagged with information about where the equipment is on the map and from which direction the photo was taken. Later, a maintenance staff member who views those photos can pinpoint the same spot on site without hesitation and draw up an appropriate repair plan. Also, at the next inspection, using the previous coordinates saved in the cloud as a reference, navigation can be displayed on the smartphone screen and it is possible to retake the photo from the exact same location and angle. This allows the progression of deterioration to be compared precisely, significantly increasing the reliability of inspection reports.


In this way, LRTK is expected to be a powerful tool for solving the challenges of position information management in indoor inspections. It combines the ease of smartphone integration with positioning accuracy comparable to that of specialized equipment, and can truly be described as the latest solution for 「enhancing recording accuracy through a practical approach」. Even without assembling expensive surveying equipment, anyone on site can contribute to high-precision position recording by leveraging LRTK. As inspection operations become increasingly digitized, skillfully adopting technologies like LRTK will likely be the key to achieving greater efficiency and improved accuracy.


FAQ

Q1. What specifically does "location information management" mean in indoor inspections? A1. In the context of indoor inspections, location information management refers to clearly recording and managing exactly where in the building an observed issue or inspection result occurred. Rather than simply writing "oil leak in the machine room," it means leaving information that pinpoints the location inside the room—for example, "Oil leak from a pipe joint at a height of 50 cm (19.7 in) above the floor in the northwest corner of Machine Room No. 〇〇." This adds spatial context to the report so that anyone reviewing it later can accurately identify the exact site.


Q2. Why can't GPS be used indoors? A2. GPS calculates position by receiving radio signals from satellites overhead. However, indoors or underground structures block the radio signals, so satellite signals cannot reach, and a position cannot be measured. Even if weak signals can be received, reflections from walls and ceilings mix with the signals (multipath), causing large errors. As a result, GPS, which can provide positioning with an accuracy of a few meters outdoors, can be off by tens of meters or more indoors and becomes impractical. Therefore, different positioning methods specific to indoor environments are required.


Q3. What are the main indoor positioning technologies in use? A3. There are several technologies for indoor positioning. Representative ones include methods using Wi‑Fi and Bluetooth beacons. This involves installing multiple access points or transmitters inside a building and estimating position from the signal strength received by a smartphone or similar device (accuracy is typically on the order of a few meters (a few m / a few ft)). Other approaches include UWB (ultra-wideband), which, under favorable conditions, can achieve high accuracy within several tens of centimeters (several tens of cm (several tens of in)). However, it requires installing dedicated antennas and is costly. Research is also advancing on estimating position using the distribution of the geomagnetic field, sound waves, and image recognition using cameras. Each has its own characteristics and challenges regarding infrastructure deployment and robustness to environmental changes, so they are used according to the application.


Q4. Is there a way to improve recording accuracy without introducing a specialized system? A4. Yes, you can improve accuracy without necessarily introducing an expensive system by using thoughtful measures. First, simply adopting operations that use maps or drawings within inspection procedures can be effective. Specifically, establish a rule that inspection locations must always be indicated on the drawing when recorded. Also, affixing number tags or QR codes to equipment and recording or scanning them in reports is a simple and effective way to prevent location mix-ups. These are low-cost measures, but if all inspectors consistently record locations in the same way, the overall information accuracy will be raised. In short, it is important to cultivate the habit of clearly indicating "where" on site rather than being vague.


Q5. 簡単に高精度の位置情報を取得できるツールはありますか? A5. 最近では、スマホを使って手軽にセンチメートル級 (half-inch-level) の位置測定を行えるツールが登場しています。その一つがLRTKです。LRTKはスマートフォンに小型の高精度GNSS受信機を取り付け、RTKという衛星測位補正技術を利用することで、屋外で2–3 cm (0.8–1.2 in) 程度の精度で現在位置を測れるようにしたものです。取得した精度の高い位置情報はそのまま写真や点検データにタグ付けできるため、点検担当者でも専門の測量器なしに高精度な位置記録が可能になります。建物内部でも、開口部や屋上など衛星電波を捉えられるポイントで測位すれば基準座標を得られますし、その座標をもとに室内の相対位置を測ることで精度の高い位置特定が行えます。従来は難しかった高精度測位が非常に身近になってきており、今後こうしたツールを活用することで、より信頼性の高い屋内点検記録が誰にでも実現できるでしょう。


Next Steps:
Explore LRTK Products & Workflows

LRTK helps professionals capture absolute coordinates, create georeferenced point clouds, and streamline surveying and construction workflows. Explore the products below, or contact us for a demo, pricing, or implementation support.

LRTK supercharges field accuracy and efficiency

​

The LRTK series delivers high-precision GNSS positioning for construction, civil engineering, and surveying, enabling significant reductions in work time and major gains in productivity. It makes it easy to handle everything from design surveys and point-cloud scanning to AR, 3D construction, as-built management, and infrastructure inspection.

bottom of page