top of page

Table of Contents

• What is RTK?

• Benefits of RTK on Construction Sites

• How to Use RTK on Construction Sites

• Simple Surveying with LRTK

• FAQ


What is RTK?

RTK stands for Real Time Kinematic and is a high‑precision positioning technique that uses satellite positioning systems (GNSS). Ordinary GPS positioning (standalone) can have position errors of several meters, but RTK uses two receivers that simultaneously receive GNSS signals: one installed at a known location called the base station and a moving receiver called the rover. The base station sends error information it obtains to the rover in real time, and the rover corrects its measurement data to achieve centimeter‑level positioning accuracy. Simply put, RTK subtracts the positioning errors of the rover on the spot using data from a fixed reference point to determine highly accurate positions.


The main feature of RTK is that it can reduce errors that are tens of centimeters with ordinary GPS to within a few centimeters. Leveraging this high accuracy, RTK is being adopted in fields where the precision of location information matters, such as civil surveying and as‑built control, machine guidance for construction equipment, drone surveying, and precision agriculture. For example, on construction sites where conventional GPS surveying caused measurement errors or construction mistakes due to position offsets, introducing RTK makes it possible to lay out points and measure as‑built conditions precisely according to design drawings.


There are two major RTK operation methods. One is operating your own base station, and the other is receiving correction information from a regional reference station network, called network RTK. In the latter case, since correction data can be obtained via mobile communications from GNSS reference stations maintained by the Geospatial Information Authority of Japan or from commercial high‑precision positioning services, the rover can perform positioning without a local base station. In Japan, services such as CLAS provided by the Quasi‑Zenith Satellite System "Michibiki" and high‑precision positioning services from mobile carriers have made network RTK easily accessible.


Benefits of RTK on Construction Sites

Using RTK on construction sites brings various advantages, such as improved construction accuracy and productivity. Here are five main benefits.


1. Dramatic Improvement in Construction Accuracy

The biggest benefit of introducing RTK is the dramatic improvement in positioning accuracy. With conventional GPS or total station positioning, small surveying errors could affect later construction accuracy. With RTK, coordinate offsets can be kept to a few centimeters or less, enabling construction to be performed with the accuracy specified in the design drawings. For example, for tasks like foundation layout (point setting) or setting road alignments, using RTK positioning values can minimize human errors to the greatest extent.


RTK also proves powerful for as‑built measurement after construction. Measuring the shape after embankment or concrete placement with RTK‑equipped instruments allows you to obtain high‑density as‑built data in a short time and immediately check differences from design values. Indeed, methods published by the Geospatial Information Authority of Japan indicate that using RTK‑GNSS makes it easier to keep as‑built measurements within allowable tolerances, proving effective for quality assurance.


As an example of improved construction accuracy, there have been cases where RTK achieved an exceptionally high positioning accuracy of horizontal accuracy 8〜12 mm (0.31〜0.47 in), which was difficult to accomplish with standalone positioning. If positioning can be done with errors of less than 1 cm (less than 0.4 in), shifts or tilts of structures can be detected immediately, raising the level of quality control significantly. By introducing RTK, previously “unmeasurable or unknown” ranges of error can be almost eliminated, offering dramatic improvements in construction accuracy.


2. Significant Efficiency Gains in Surveying Work

RTK is also a tool that significantly streamlines surveying tasks on site. Because high‑precision positioning is available in real time, complicated surveying procedures and post‑processing calculations that were once necessary can be simplified. For example, surveying with a total station requires setting up the instrument for each line of sight, but RTK‑GNSS allows continuous positioning while moving, as long as there is a clear view of the sky. On large development sites, a single operator can walk around and complete terrain surveys and point recordings without repeatedly relocating and sighting an instrument.


Using network RTK also eliminates the need to install a base station on site, reducing preparation time. In one contractor’s report, tasks that previously required one round with a total station and one round with a level were completed in a single round by combining RTK with a level. Cutting procedures in half reduced the workload under extreme heat and was highly appreciated by field crews. In this way, RTK streamlines surveying and layout processes, substantially shortening work time. The result is shorter schedules and reduced labor costs, contributing to productivity improvements across the site.


3. Alleviating Labor Shortages and Reducing Costs

RTK is highly effective against the worsening labor shortage in the construction industry. High‑precision surveying tasks can be completed by fewer people, allowing technology to compensate for a shortage of skilled surveyors. Traditionally, tasks like installing batter boards and as‑built measurement were done by teams, but more cases now allow a single person with an RTK receiver and a tablet to perform surveying and recording. This reduces labor costs and allows freed personnel to be assigned to other important tasks.


RTK also helps reduce outsourcing costs for surveying. For example, even for small projects that previously required specialized surveyors for precision surveys, site staff can handle the work with RTK equipment, saving outsourcing fees. Recently, low‑cost RTK services and devices have appeared, lowering initial investment and making adoption easier. Many small and medium enterprises feel that “the barrier to RTK adoption has dropped,” making RTK a more accessible technology.


Furthermore, by reducing construction mistakes and rework through RTK, unnecessary costs can be reduced. Preventing redo work due to position offsets reduces material waste and rework man‑hours. Thus, RTK improves efficiency in both personnel and costs, helping complete more projects with limited resources.


4. Improved Site Safety and Strengthened Quality Control

Introducing RTK improves site safety and quality control. Because high‑precision surveying can be performed quickly, the time workers spend in hazardous areas is reduced. For example, RTK allows pile driving or measurements beside busy roads or on steep slopes to be performed from a safe distance. Mounting an RTK receiver on a drone enables surveying from the air, capturing terrain data in areas where people cannot enter, and substituting for dangerous tasks on unstable slopes or riverbeds, reducing worker risk.


RTK is also a powerful tool for quality control. Since high‑precision data is available in real time, deviations in as‑built conditions can be detected and corrected immediately during construction. For example, during paving, paving operations can proceed while checking deviations from design elevations, or positions can be verified and adjusted immediately when installing structures—achieving instant measurement and instant correction. This prevents issues noted during as‑built inspections and reduces quality defects and construction errors.


Additionally, RTK measurement data can be quickly shared and recorded via the cloud, which is useful for ensuring traceability. Keeping a history of who measured what, where, and with what accuracy increases the reliability of construction management. Combining photogrammetry data or AR technology with on‑site records enhances the accuracy of construction records and inspection documents. Overall, RTK helps build a safe and high‑quality construction management system.


5. Promoting ICT Construction and Contributing to Construction DX

RTK is not merely a tool for improving survey accuracy; it is foundational technology for ICT construction and DX (digital transformation) in the construction industry. Initiatives such as *i-Construction* promoted by the Ministry of Land, Infrastructure, Transport and Tourism and CIM (Construction Information Modeling) emphasize the use of 3D on‑site data, and RTK is indispensable for acquiring the high‑precision position information needed. Using RTK, drone aerial surveys can produce high‑accuracy point cloud data, greatly reducing the number of ground control points previously required. This achieves both labor savings and accuracy improvements in construction and promotes digital construction.


RTK is also used for machine guidance and machine control (automatic control) of construction equipment such as bulldozers and excavators. Systems that mount RTK‑GNSS antennas on heavy equipment and automatically control blade or bucket height and position according to design data rely on accurate current position information. With RTK providing high‑precision real‑time position information, machines can perform precise automated construction with errors of only a few centimeters. This is a step toward future unmanned construction and autonomous driving technologies; RTK is essential for the autonomous navigation of drones and vehicles.


Furthermore, linking RTK‑acquired positioning data to BIM/CIM models promotes seamless use of digital data across design, construction, and maintenance processes. For example, point cloud data of as‑built conditions collected with RTK can be integrated into a CIM model for as‑built verification or used for future renovation projects. Such data‑driven construction management leads to advanced infrastructure maintenance and asset management. Introducing RTK is the first step toward digitizing and smartening your construction processes and is a significant advantage in adapting to next‑generation industry standards.


How to Use RTK on Construction Sites

How can RTK technology be used in the field? Here are key applications in construction and civil engineering.


Surveying Work and Batter Board Installation

Traditional surveying by surveyors typically uses total stations and levels and requires multiple people. With RTK, one person can efficiently perform on‑site surveying and batter board (point setting using stakes) work. If design coordinate data is loaded into an RTK receiver and a tablet, the operator can confirm the difference between their current position and the design position on the screen and place stakes or markings at accurate points. On large sites, you can collect survey points while walking without being constrained by lines of sight, eliminating the need to set up many temporary survey benchmarks or repeatedly relocate surveying instruments.


However, because RTK uses GNSS signals, positioning can become unstable under elevated structures or in densely wooded areas. Still, on most outdoor development or road construction sites, RTK can dramatically improve the efficiency of surveying and layout tasks.


As‑Built Measurement and Quality Inspection

RTK is also used for as‑built measurement after construction. For example, when checking ground elevation of finished land or road surface elevation after paving, an RTK receiver can be used to quickly measure many points and compare them with design data for as‑built verification. RTK can acquire 3D coordinates across the entire site in a short time, allowing you to place measurement points at high density as needed to grasp detailed terrain or structure shapes.


As‑built data can be stored and shared electronically, greatly reducing the need to write measured values on paper drawings. Keeping 3D data makes later inspections and as‑built reporting smoother. Under the Ministry of Land, Infrastructure, Transport and Tourism’s i‑Construction initiative, combining drone surveys and RTK for as‑built management has streamlined submission documents and reduced inspection items, making RTK use a good example of improving quality inspection efficiency.


Machine Guidance for Construction Equipment

Machine guidance/machine control is the technology that mounts RTK‑GNSS on construction equipment like bulldozers and excavators for automatic or semi‑automatic control. By measuring in real time the position of the blade tip or bucket tip and comparing it with preloaded design surfaces or lines, machines can automatically adjust blade height or display cut/fill guidance to the operator without constant human checks. Centimeter‑level RTK accuracy allows machines to perform finishing work with precision on the order of a few centimeters.


Introducing machine guidance streamlines grading and other tasks that previously required foreman instructions or surveyor checks. With digital assistance replacing the intuition and experience required of skilled operators, one operator can achieve high‑quality work, reducing rework and checking tasks after construction. Machine control with RTK is essential for large‑scale works and unmanned (remote‑operated) construction and is a key use that supports the future smartification of construction sites.


Drone Surveying and Aerial Photography

RTK is also used in photogrammetry by drones (unmanned aerial vehicles). Installing an RTK‑capable GNSS module on a drone makes the recorded coordinates of aerial photos centimeter‑accurate, dramatically improving the accuracy of orthophotos and 3D point clouds generated from them. Traditionally, aerial surveying required many ground control points for error correction, but RTK drones greatly reduce the number of control points needed and, in some cases, enable surveying without them.


For example, in earthwork volume management, accurate cut/fill volumes can be calculated from as‑built data obtained by RTK drones. For works in mountainous roads or river projects where access is difficult, drones provide safe, fast situational awareness. Acquired data can be converted into 3D models for civil design and schedule management or used for fixed‑point observation to monitor progress. RTK‑equipped drone surveying is now one of the recommended methods in i‑Construction and is expected to be adopted at more sites in the future.


Simple Surveying with LRTK

Finally, we introduce LRTK, a latest solution that makes RTK technology easy to use on site. LRTK is a pocket‑sized RTK‑GNSS receiver developed by Refixia Inc. (a startup from Tokyo Institute of Technology) that can be used in combination with your smartphone (currently mainly iPhone/iPad). By attaching the dedicated small receiver to a smartphone and launching the app, anyone can easily achieve centimeter‑level positioning.


Main benefits of LRTK:


• High‑precision positioning: RTK corrections can improve position information obtained by a smartphone to centimeter accuracy. Demonstration experiments have shown horizontal accuracy of approximately 8〜12 mm (0.31〜0.47 in), confirming accuracy comparable to conventional stationary RTK surveying instruments.

• Multifunctionality: LRTK is more than a positioning device; the dedicated app supports point cloud measurement, batter board (layout) assistance, attaching high‑precision position information to photos, AR overlay of completed images, and more. It also supports cloud integration, enabling immediate sharing of measurement data for real‑time collaboration between the field and the office.

• Low cost: Offered at a price point far more accessible than conventional RTK equipment, multiple units can realistically be deployed for each field staff member. Operation does not require bulky equipment or specialist knowledge, allowing small contractors to incorporate high‑precision positioning into daily work without heavy burdens.


LRTK is thus an optimal device for construction and civil engineering professionals who want to introduce RTK. With a palm‑sized device and a smartphone, high‑precision surveying can be performed on site immediately, allowing ICT construction to be practiced as part of routine work without special surveying qualifications or advanced skills. Field supervisors and workers expect that “productivity would greatly increase if each person had one unit,” and LRTK is quietly becoming a popular, easy‑to‑use surveying tool. The LRTK series is compatible with the Ministry’s *i‑Construction* initiative and is an ideal solution to accelerate digitalization on construction sites. If interested, please refer to the official LRTK website for more information and consider updating your site’s surveying workflow with LRTK.


FAQ

Q1. What is the difference between RTK and normal GPS positioning? A1. The biggest difference is positioning accuracy. Standalone GPS can have errors of several meters, while RTK reduces errors to a few centimeters through corrections from a base station. RTK also performs position correction in real time, allowing you to obtain high‑precision coordinates on site immediately.


Q2. What do I need to use RTK? A2. Basically, you need an RTK‑capable GNSS receiver (the rover). To obtain correction information, you either prepare another receiver as a base station or set up an environment to receive corrections via a network. For network RTK, connecting via a communication device like a smartphone to Michibiki’s CLAS or a commercial correction service enables high‑precision positioning without a local base station. In any case, RTK requires a clear view of the sky so that a sufficient number of GNSS satellites can be received.


Q3. How can RTK be used specifically on construction sites? A3. RTK is used in many ways in construction and civil engineering. For field surveying and batter board installation, RTK enables accurate placement of benchmarks and stakeouts based on design coordinates. For as‑built measurement, RTK can quickly capture the finished shape of embankments and structures and compare them with design values. For machine guidance on bulldozers and other equipment, RTK provides high‑precision current position information to automatically control blade height. RTK is also used in drone 3D surveying to obtain detailed terrain data with high accuracy.


Q4. Are RTK introduction costs and barriers high? A4. Traditionally, RTK‑capable surveying equipment was expensive and difficult for anyone other than large companies or specialists to adopt. However, affordable receivers and smartphone‑compatible products have emerged, significantly lowering initial costs. The spread of network RTK has also made local base stations unnecessary, making it easier for small and medium businesses to adopt RTK. Considering the improvements in efficiency and reduced mistakes from RTK adoption, the investment is likely to be worthwhile.


Q5. What precautions or limitations are there when using RTK? A5. Yes, there are several points to note. RTK positioning depends on GNSS satellite signals, so accuracy may decrease in areas obstructed by tall buildings or forests where satellites cannot be adequately captured. RTK cannot be used inside tunnels or indoors. Network RTK requires a communication line, and poor reception can prevent the reception of correction data. Also, high‑precision positioning requires the receiver to achieve a state called "Fix": when Fix is obtained, errors are about 2〜3 cm (0.8〜1.2 in) or less; if Fix is not achieved and the solution is a Float, accuracy drops to tens of centimeters to about 1 m (3.3 ft). Therefore, when using RTK, confirm satellite reception and correction data reception and ensure Fix is obtained before measuring. When these conditions are met, RTK can measure positions with very high reliability.


Next Steps:
Explore LRTK Products & Workflows

LRTK helps professionals capture absolute coordinates, create georeferenced point clouds, and streamline surveying and construction workflows. Explore the products below, or contact us for a demo, pricing, or implementation support.

LRTK supercharges field accuracy and efficiency

​

The LRTK series delivers high-precision GNSS positioning for construction, civil engineering, and surveying, enabling significant reductions in work time and major gains in productivity. It makes it easy to handle everything from design surveys and point-cloud scanning to AR, 3D construction, as-built management, and infrastructure inspection.

bottom of page