top of page

Table of Contents

• Cross-sections indispensable on site and trends in 3D surveying

• Traditional cross-section surveying methods and their challenges

• Efficiency gains by creating cross-sections with RTK

• How the advent of point-cloud surveying is changing cross-section creation

• 3D point-cloud measurement anyone can do: Smartphone × RTK

• Benefits of using RTK cross-sections

• Points that make adoption easy even on small sites

• Summary: Site DX starting from RTK cross-sections

• FAQ


Cross-sections indispensable on site and trends in 3D surveying

In civil engineering and construction, cross-sections—drawings that show the cross-sectional shape at a given location—are fundamental deliverables essential for quality control, as-built verification, and earthwork volume calculations. For example, in roadworks, cross-sections summarize the pavement and roadbed heights and thicknesses at specified locations for comparison with design and verification of the finished work. Cross-sections also allow understanding of internal deformation and long-term changes for slope faces and maintenance management of dams and bridges. In this way, cross-sections visually convey elevation information and play an important role in quantitatively understanding the site.


Recently, with advances in ICT, 3D surveying is rapidly spreading. Methods that capture entire sites as point-cloud data using drone photogrammetry or laser scanners have attracted attention, and the industry-wide shift to 3D has been driven in part by the Ministry of Land, Infrastructure, Transport and Tourism’s promotion of *i-Construction*. As a first step, many site engineers are beginning to adopt 3D workflows starting from familiar cross-sections. “RTK cross-sections” are cross-sections obtained using high-precision positioning by RTK-GNSS (described later), and using them makes it easier than before to work with 3D site data. This article organizes traditional cross-section creation methods and their challenges, explains how RTK technology and point-cloud measurement change cross-section workflows, and introduces how combining smartphones with RTK enables anyone to start high-precision 3D surveying easily.


Traditional cross-section surveying methods and their challenges

Traditionally, cross-sections on site were created mainly by manual surveying and manual drafting. Using tape measures, staffs (leveling rods), levels, or total stations, surveyors measured points along the cross-section line one by one. For example, when measuring a road cross-section, heights and widths are measured at fixed intervals such as every 10 m (32.8 ft) or at points where the shape changes, and those points are connected to draw the cross-sectional shape. On slopes, personnel would climb inclined ground to measure heights at key locations. This method has several noted challenges.


• Personnel and time burden: Field cross-section surveys typically required two or more people (a surveyor and an assistant) to set up and move equipment. Even measuring a single cross-section involved time-consuming placement of survey points and equipment setup, and taking multiple cross-sections meant even longer work. After measurement, there was also office work to create drawings, imposing a large burden on site engineers.

• Safety risks: Surveying on steep slopes or beside busy roads required workers to enter hazardous areas. There is risk of falls from height, collapses, or collisions with vehicles—risks that come with direct human measurement.

• Limits on measured points and oversight: Manual surveying is limited in the number of points that can be physically obtained, so measurements tend to be of representative points only. As a result, fine irregularities or local errors between points may be missed. The longer the section or the more complex the shape, the harder it is to capture the shape comprehensively without omissions.

• Human error: Mistakes such as writing down measured values incorrectly or forgetting to take photo records can occur. If missed locations are found later, it is necessary to return to the site, which is inefficient. Record errors and missing data due to manual entry and drawing can also reduce cross-section accuracy and cause rework.


As described above, traditional cross-section creation faced challenges of being “time-consuming,” “hazardous,” and “lacking comprehensiveness.” Therefore, more efficient and reliable measurement methods have long been sought on site.


Efficiency gains by creating cross-sections with RTK

Against this backdrop, RTK positioning technology, which corrects satellite positioning errors to achieve high accuracy, has emerged. RTK stands for Real Time Kinematic, and it corrects errors by communicating satellite positioning data between a base station and a rover, enabling real-time positioning with errors reduced to the order of a few centimeters (a few inches). In recent years, the dissemination of electronic reference stations by the Geospatial Information Authority of Japan and private correction information services (so-called network RTK) has made it possible to use RTK easily without installing a dedicated base station.


With RTK-based cross-section surveying, an operator can record measurement points rapidly by carrying a pole equipped with a receiver and working solo. There is no need to set up a machine like a total station to read angles and distances, and as long as GNSS reception is possible, measurements can be taken even where line of sight is poor. Using dedicated apps or data loggers, coordinates are automatically saved each time a point is recorded, so there is no need to transcribe onto paper. For example, measuring a road cross-section over a 100 m (328.1 ft) section with RTK that used to take half a day can sometimes be completed in 1–2 hours. RTK cross-sections, which can be measured efficiently by one person, dramatically reduce overall field and office work time and directly lighten the burden on site engineers.


However, RTK measurements still involve measuring points one by one by a person, as with traditional methods. Cross-sections obtained are represented by lines connecting points, so they do not capture every detail of the shape between points. There are also constraints where GNSS signals do not reach, such as in forests or tunnels. Nevertheless, RTK contributes greatly to labor-saving in cross-section creation and has enabled one-person surveying at many sites. The 3D measurement using point clouds, introduced next, aims to further transform cross-section creation when combined with RTK.


How the advent of point-cloud surveying is changing cross-section creation

With the arrival of 3D surveying technologies such as laser scanners and drone photogrammetry, site shapes can now be recorded as large collections of data points—point clouds. Point-cloud surveys obtain countless measurement points by scanning the entire site, so there is virtually no risk of gaps between points as with manual surveying. Since 3D data can be used later to slice cross-sections at arbitrary locations, issues like “I forgot to measure that spot” become less likely. Furthermore, using point-cloud data has produced major changes in cross-section creation:


• No omission of necessary data: Point-cloud scanning captures the entire site at once, including details that were easily overlooked in traditional surveys. Because you can cut cross-sections anywhere afterward, there is reassurance that “if the data are captured, you can always measure later.” This reduces the need for additional surveys and prevents losses from rework.

• Automation of cross-section creation: In point-cloud processing software, cross-sections along arbitrary section lines can be automatically generated from the acquired point cloud. Without complex drafting work, specifying the section position in software immediately displays and outputs the cross-sectional shape. Multiple sections can be processed at once—whether 10 or 20—enabling batch creation in a short time and greatly reducing manual drafting burdens.

• Accurate grasp of complex shapes: Complex terrain and curved surfaces that were difficult to capture manually can be precisely depicted from point-cloud sections. Point-cloud cross-sections faithfully reproduce features such as irregularities of vegetation mats on slopes, curvatures of tunnel interior walls, and subtle undulations of shotcrete surfaces. Areas that were approximated by average shapes can be accurately captured, enabling detection of slight differences from design values.

• Advanced earthwork volume calculations: By comparing pre- and post-construction terrain point clouds, embankment and cut volumes can be calculated directly in 3D without relying on cross-sections. Local surpluses or deficits that average cross-section methods could not capture can be precisely determined from differences between point clouds. As-built management accuracy dramatically improves, and deliverables can be output automatically from point clouds, speeding up deliverable creation.


By utilizing point-cloud measurement, cross-section creation is becoming a digital process where the required sections can be obtained later as needed. Point-cloud data themselves visualize the site in 3D, making it easier to share the site’s irregularities and three-dimensional image among stakeholders—things that were difficult to convey with 2D drawings alone. This is truly a DX (digital transformation) of surveying and drawing creation, attracting attention as a high-precision, labor-saving new method for site engineers.


3D point-cloud measurement anyone can do: Smartphone × RTK

While the benefits of 3D point clouds are attractive, traditionally they required expensive equipment and specialized knowledge, making adoption difficult. A recent development is mobile surveying systems that combine smartphones and RTK. For example, solutions such as LRTK attach a small RTK-GNSS receiver to a smartphone or tablet and use the phone’s built-in LiDAR scanner or camera to scan the surroundings, easily generating high-density point clouds. Because RTK provides accurate coordinates to each point in real time, the acquired point cloud becomes a 3D model already positioned in map coordinates. What previously required costly laser scanners and experienced surveyors can now be done by anyone with a single smartphone.


The actual workflow is very simple. An operator walks around the site with a smartphone (+ RTK receiver) while scanning, and the surrounding terrain and structures are point-clouded in just a few minutes. After acquisition, one tap uploads the data from the smartphone to a cloud service, and the 3D point cloud can be viewed and analyzed immediately from an office PC or tablet. In a browser-based 3D viewer, placing a section line at an arbitrary location instantly generates a point-cloud cross-section on the spot. The generated cross-section can be downloaded as an image or exported in DXF format for CAD software with one click. You can also overlay design lines to compare with as-built, and the resulting drawings and point-cloud data can be shared via URL so all stakeholders can view them immediately.


Using this smartphone×RTK workflow, you can create cross-sections and share them with stakeholders on the same day as measurement, informing the next decisions. The surveying→drawing→sharing process connects seamlessly, dramatically improving tasks that used to take days. Since all data are stored in the cloud, you can always access the latest information and avoid mistakes from outdated drawings or missed updates. A consistent digital workflow from the field to the cloud is being realized, greatly contributing to labor reduction, speed-up, and improved accuracy in surveying.


Benefits of using RTK cross-sections

The latest RTK cross-section creation methods deliver dramatic efficiency improvements and quality enhancement compared to traditional approaches. Below are the main benefits organized from the perspectives of “work time,” “accuracy,” and “information sharing.”


• Reduced work time: Point-cloud scanning and automated processing drastically reduce the time required for cross-section creation. Tasks that once took a full day for surveying and drafting can, in some cases, be completed with a few minutes of smartphone measurement plus seconds of cloud processing. Measuring large areas quickly by one person makes staffing easier, and quick cross-section checks can be performed alongside other tasks. This contributes directly to shortened schedules and improved responsiveness in construction management.

• Improved accuracy and comprehensiveness: RTK-GNSS correction and high-density point clouds dramatically improve the accuracy and reliability of acquired data. Human omission and recording errors are reduced, producing consistently high-quality cross-section data. Because point clouds capture the site’s shape comprehensively, the lines depicted in cross-sections faithfully reflect existing conditions. Subtle irregularities and variations in as-built conditions are captured, enabling accurate verification against design.

• Information sharing and consensus building: Point-cloud data and cross-sections provide rich visual information that helps build common understanding among stakeholders. Color-coded displays on 3D point clouds can show surpluses and deficits, and overlaying design and measured lines on cross-sections makes differences immediately apparent. Even for clients or local residents without technical expertise, using photo-like 3D models or cross-sections facilitates intuitive consensus building. Overlaying design drawings on live-site video with AR features further smooths explanations by offering a “seeing is believing” effect.


Adopting RTK cross-sections thus outperforms traditional methods in speed, accuracy, and clarity. As a result, it reduces the burden on site engineers, improves safety, and is effective in explanations to clients and coordination with other departments.


Points that make adoption easy even on small sites

Hearing “latest technology” might suggest high cost and high difficulty, but smartphone+RTK cross-section measurement is accessible even for small sites and small-to-medium contractors. Reasons include:


• Low initial cost: Leveraging general-purpose devices like smartphones and tablets is far less expensive than purchasing dedicated large equipment. Small RTK receivers are also much cheaper than traditional large surveying instruments, making them more affordable. The barrier to entry has dropped significantly compared to laser scanners that cost several million yen.

• Easy operation: Special equipment is minimal and highly portable. Just attach a device weighing a few hundred grams to a smartphone, and you get mobility even on narrow sites or for distant work. Many products can be powered from the smartphone, minimizing charging hassle.

• Simple usability: The apps are intuitive, designed for use without specialized surveying knowledge. If you follow on-screen guidance, point-cloud acquisition through to drawing creation is completed automatically, so even non-experts can use it practically. It can be taught as part of new-employee training and quickly adopted.

• Contribution to labor reduction: Because one person can complete measurement through to drawing creation, it’s easy to adopt in labor-short sites. In-house surveying that used to be outsourced saves costs, and greater flexibility in scheduling improves responsiveness. The ability to measure on demand in-house enhances site responsiveness.


Summary: Site DX starting from RTK cross-sections

Cross-section creation methods are undergoing a major shift thanks to advances in RTK positioning and smartphone technology. High-precision 3D surveying can now be done easily by anyone, and measurements and drawing creation that used to require specialists can be completed in-house. This accelerates site DX, allowing small teams to safely and quickly grasp as-built data and apply it to construction management. Starting with familiar RTK cross-sections is a good first step to experience these benefits.


Using systems like LRTK that leverage smartphones, you can begin 3D site surveying as early as tomorrow. Attach a small device to your phone and use a user-friendly app to measure—immediately obtaining high-precision point-cloud data and cross-sections. No complex procedures or costly equipment are required. Site engineers are encouraged to try simple surveying with RTK cross-sections. Embrace new technologies proactively to improve work efficiency and deliverable quality.


FAQ (Frequently Asked Questions)

Q: What is RTK? A: RTK (Real Time Kinematic) is a technology that corrects measurement errors in GNSS (satellite positioning) in real time to enable high-precision positioning. By communicating between a base station and a rover to remove error factors in satellite signals, RTK achieves positioning accuracy on the order of a few centimeters (a few inches). Whereas standalone GPS positioning typically has errors on the order of meters, RTK provides positioning accurate enough for surveying and construction.


Q: What do I need to create RTK cross-sections? A: Basically, you need an RTK-capable GNSS receiver (rover) and a base station or network service that provides correction information. You also need a terminal (controller or tablet) to record and process the receiver’s position data. With smartphone-compatible solutions, you can attach a small RTK receiver to a smartphone and start surveying by connecting to a correction service over the internet. Then you use an app to take point measurements or perform point-cloud scans and generate cross-sections.


Q: Can people without surveying expertise use it? A: Modern smartphone surveying systems feature intuitive operation and are designed to be easy to use even without specialized knowledge. Understanding basic surveying terminology and coordinate concepts is desirable, but following the app’s guidance will automatically complete data acquisition through to drawing creation. Less-experienced field technicians can learn quickly through training, and many sites are already using these systems in practice.


Q: What level of accuracy can be achieved? A: It depends on the operating environment, but RTK positioning can achieve horizontal errors on the order of a few centimeters (a few inches), and elevation accuracy around 5 cm (2.0 in) or better. In clear environments, this can match the high accuracy of traditional optical surveying instruments and is reliable enough for as-built management and quantity measurement. However, accuracy may degrade in heavily vegetated areas or environments with many obstructions. Operating under appropriate conditions and repeating measurements as needed will yield stable results.


Q: How do costs compare with traditional methods? A: Considering the significant reductions in labor and work time, RTK-based methods are cost-effective overall. Surveys that traditionally required two to three people can often be done by one person, and drawing creation that took days can be completed the same day, leading to large reductions in labor and outsourcing costs. Equipment-wise, a smartphone with a small receiver is far cheaper than traditional large surveying instruments. Although initial investment is required, lower operating costs and savings from in-house surveying make it a worthwhile investment.


Next Steps:
Explore LRTK Products & Workflows

LRTK helps professionals capture absolute coordinates, create georeferenced point clouds, and streamline surveying and construction workflows. Explore the products below, or contact us for a demo, pricing, or implementation support.

LRTK supercharges field accuracy and efficiency

​

The LRTK series delivers high-precision GNSS positioning for construction, civil engineering, and surveying, enabling significant reductions in work time and major gains in productivity. It makes it easy to handle everything from design surveys and point-cloud scanning to AR, 3D construction, as-built management, and infrastructure inspection.

bottom of page